前言:
G1it
3^*$ l\0PwD 半个月前开始学习REDHAT LINUX7.0。作为一个Linux新手,不可避免的遇上了一些问题,通过翻阅书籍资料,查看BBS,自己的摸索实践,也解决了一些问题。想到自己的经验教训可供他人借鉴,于是大胆写出来,一来可以当作学习笔记保存,二来希望对刚刚接触Linux的朋友有所帮助。由于本人能力所限,笔记中有所疏漏不足也在所难免,还请各位高手海涵。
kKRu]0J~[ . AA#
G 一、FTP简介
<
e3] pM L[PqEN\i 在网络应用中,最广泛的当属WWW和FTP这两种。FTP就是File Transport Protocol文件传输协议的缩写,FTP服务器能够在网络上提供文件传输服务。FTP服务器根据服务对象的不同可分为匿名服务器(Anonymous Ftp Server)和系统FTP服务器。前者是任何人都可以使用,后者就只能是在FTP服务器上有合法账号的人才能使用。
)'jGf;du M#Z^8( 二、ProFTPD简介
j&dCP@G m\*ca3$ 目前在UNIX和LINUX下常用的免费FTP服务器软件主要是Wu-FTP和ProFTP这两种。Wu-FTP广泛应用在众多的Unix和Linux系统中,是RedHat Linux默认的FTP服务器软件,但是被发现安全漏洞也相当多。ProFTP正是针对Wu-FTP的弱项而开发的,除了改进的安全性,还具备许多Wu-FTP没有的特点,如设置简单,能以Stand-alone模式运行等等。ProFTP已经成为继Wu-FTP之后最为流行的FTP服务器软件,越来越多的站点选用它构筑安全高效的FTP站点,TurboLinux就是一个例子。
ts&\JbL ?1g`'q@T% 三、ProFTP的设置
o#"yFP1 +s_a{iMVP 设置目标:把IP为10.0.8.39的RedHat Linux配置为FTP服务器,并允许以anonymous匿名访问FTP服务器,且只允许同一网段(10.0.8.*)的电脑对FTP的“incoming”目录有“Write”权限。
Zbl*U(KU? *0oa2fz% ProFTP的最新版本可以从
www.proftpd.org上下载。这里我们以稳定的1.2.1版本的rpm安装包为例子(源代码编译也很简单)加以解说。
*DcIC]ao[ AHr^G' 第一步:配置基本的匿名服务器
/V0Put ]u<U[l-w 下载1.2.1的rpm后,在Gnome窗口下右键单击文件,单击“Show info”,查看rpm包的一些信息,这里我们要注意的是一些文件的默认安装路径,如/usr/local/etc/proftpd.conf(ProFTPD的配置文件),/usr/sbin/proftpd(以stand-alone模式运行Proftpd的命令),/usr/doc/proftpd-1.2.1(Proftpd的文档及配置实例文件所在目录),然后双击rpm包安装软件。
4 dHGU^#WZ :*g$@T 如果你像我一样,安装RedHat Linux7.0时选择了FTP服务,那你先得把安装的Wu-FTP软件删除。输入“rpm -e anonftp”和“rpm -e wu-ftpd”删除已有的FTP服务。
5M> p%/ V}vL[=QFZ( ProFTP安装结束后,编辑/usr/local/etc/proftpd.conf,找到“Group nobody”,改为“Group nobody”,因为RedHat Linux7.0中没有“nobody”这个组。到此为止,一个提供匿名服务的FTP服务器已经可以运行了。输入“proftpd”运行FTP服务,然后“ftp 10.0.8.39”以“anonymous”登录,看能否正常登录。一般来说,都能够登录进去的。
/Gnt.%y& {{gd}g 注意:直接运行“Proftpd”将使FTP服务以stand-alone模式启动,该模式相对与dameon进程模式更具安全性,推荐使用。不过你可以把“Proftpd”加入到/etc/rc.d/rc.local里,这样电脑启动完毕,Proftpd也就启动了。
k6DJ(.n'%a 第二步:配置incoming子目录的权限
IM6n\EZ^ f4\F:YT 打开proftpd.conf,在和段之间添加如下设置:
Q(x=;wf5r ;~
Xjk mx1Bk9h%Xe &:C[
n q L$a{%]I Order allow,deny
u`B/ 9-K)y Allow from 10.0.8.
c='W{47 Deny from all
Ib2&L m; =S]3P* b"@-9ke5I nzxHd7NIZ !p ~.Y+ 表示在incoming这个子目录下,从10.0.8这个网段登录的客户端有写入“WRITE”权限,其它人对该目录的写如权限都是被禁止的。如果要对所有的用户开放写入权限,只要把和之间的内容换成“Allowall“。
M`#g>~bI#R kLs{B 四、FTP服务器相关命令
%iPIgma sMAH;'`!Eu 1、ftpshut:关闭FTP服务,并在/etc下生成文件shutmsg。要重新开放FTP服务,把/etc/shutmsg删除。
&Odrq#o?R 2、ftpcout:FTP服务器在线人数信息显示。
xP9R
d/xa| 3、ftpwho:FTP服务器在线人员名单。
IecD41% P{s1NorKDh PRYm1Y 附录:Proftpd.conf全文及解释
Gyy4)dP ^4JK4+!Zfq # This is a basic ProFTPD configuration file (rename it to
P5dD& # ''proftpd.conf'' for actual use. It establishes a single server
ve a$G~[%6 # and a single anonymous login. It assumes that you have a user/group
XmO]^ ` # "nobody" and "ftp" for normal operation and anon.
,F!-17_vt X,M!Tp ServerName "MY REDHAT LINUX FTP" #设定FTP服务器的名称
i< imE# /QlzWson ServerType standalone #设置FTP以Standalone模式运行,而不是以dameon模式
_Q\rZ
l 9JMf
T] DefaultServer on #默认FTP服务器工作
q 7W7sw V[^AV"V # Port 21 is the standard FTP port.
1mh7fZgn k,OxGG Port 21 #FTP服务默认占用的端口
\\Zsxya1 U1yspHiZ # Umask 022 is a good standard umask to prevent new dirs and files
-hF!_);{ rWJRoGk/ # from being group and world writable.
yq2AZ@}" Umask 022 #默认
we}5'bS> CyVi{"aF3 RequireValidShell off #保证匿名用户正常登录,不要更改
hYFi"ck =JTwH>fD ServerIdent off #不显示ftp服务器版本信息,以增强安全性
.GYdC' \'w.<)(GI # To prevent DoS attacks, set the maximum number of child processes
w4^$@GtN # to 30. If you need to allow more than 30 concurrent connections
^eV K. # at once, simply increase this value. Note that this ONLY works
}f{5-iwD} # in standalone mode, in inetd mode you should use an inetd server
s)'+,lKw # that allows you to limit maximum number of processes per service
"FE%k>aV@v # (such as xinetd)
f/kYm\Zc MaxInstances 30
#~rQ\A!4 ,o
`tRh< # Set the user and group that the server normally runs at.
,rY}IwMw Q[!?SSX% User nobody #设置FTP服务以nobody运行
v!S(T];) F_}y[Yn^ Group nobody #注意:原来是“Group nobody”,一定要改为“Group nobody”
}
?+0s=Z I_Gm2Dd # Normally, we want files to be overwriteable.
q|lP?-j dn%'bt AllowOverwrite on
RXWdqaENx 8BY`~TZO$q E9.1~
) # A basic anonymous configuration, no upload directories.下面一段就是匿名服务的设置。
2:[<E2z ,ueA'GZ *|+$7j User ftp #匿名登录使用ftp用户
;]BNc" mCI5^%*0jQ Group ftp #匿名登录使用ftp组
'w;J)_Yc2 {j[*:l0Ui # We want clients to be able to login with "anonymous" as well as "ftp"
1 j|XC 4&L,QSJ V UserAlias anonymous guest #给ftp用户anonymous的别名,使得anonymous登录就是ftp用户登录。
*rm[\ ]3U|K .G # Limit the maximum number of anonymous logins
/HSg) DfOigLG* MaxClients 10 #最多10个匿名用户同时在线
:h0!giqoQ :W'.SRD # We want ''welcome.msg'' displayed at login, and ''.message'' displayed
JV;VR9-l -S@ ys # in each newly chdired directory.
v49i.c9 1
!.PH DisplayLogin welcome.msg #登录FTP显示的欢迎信息。放在FTP的根目录下。
I=E\=UTG,5 nwDW<J{f|U DisplayFirstChdir .message
Nw1 .x *z'Rl'j9[ # Limit WRITE everywhere in the anonymous chroot
hz2f7g 4l{La}Aj #说明看正文。
fhHTp_u)2 :'!_PN IxWX2yJ] Order allow,deny
o:%;AOcl Allow from 10.0.8.
Kna@K$6{w= Deny from all